Loading...
Loading...
|
|
Q. What is the service type ?
A. In case of any manufacturing defect or non-functionality of the product, the customer would have to take the product to the nearest service ce ...morenter. The service center would repair the fault. Incase the fault is not serviceable, the service center would take a call & give the replacement to the customer. less
Q. What is the type of Warranty ?
A. Domestic
Q. What is covered in Warranty ?
A. Any manufacturing defect or non functionality of the product.
Q. What is not covered in Warranty ?
A. Manual damage to the set is not covered under warranty.
| Validity | Covers | Type Accepted |
|---|---|---|
| 30 days from delivery | Damaged, Defective, Item not as described | Replacement |
| Validity | Covers | Type Accepted |
|---|---|---|
| 30 days from delivery | Exchange for colors and size, Does not fit | Exchange |
| Validity | Covers | Type Accepted |
|---|---|---|
| 10 days from delivery | Damaged, Item not as described | Replacement |
| Delivery and Installation [–] | |
|---|---|
|
| In The Box | |
|---|---|
| Sales Package | Turntable Unit, Turntable Platter, Turntable Mat, Dust Cover, Headshell, Adapter |
| General | |
|---|---|
| Type | Manual |
| Drive System | Belt-drive System |
| Motor Control | High Quality, Extra Low Vibration Synchronous Motor |
| Speed Operation | Manual Operation |
| Speed Rate | 33.3 RPM, 45.1 RPM Speed |
| Body Features | |
|---|---|
| Plinth | Round Edged Plinth |
| Cartridge Features | |
|---|---|
| Cartridge Type | Goldring Electra |
| Cartridge Material | Magnet |
| Cartridge Weight | 4.2 g |
| Other Cartridge Features | Moving Magnet Transducer, 16 mm/N Static Compliance, 0.7 mg Equivalent Tip Mass, 26° Verticle Tracking Angle, Platter: 22mm angled MDF |
| Tonearm Features | |
|---|---|
| Tonearm Material | Aluminium |
| Overhang | 19.1 mm |
| Other Tonearm Features | One Piece Diecast Aluminum, 9 g Mass, 1.75 g of Verticle Tracking Force |
| Stylus Features | |
|---|---|
| Stylus Type | D152E Stylus |
| Stylus Radius | r/R 7/18 m |
| Audio Features | |
|---|---|
| Frequency Response | 3dB, 20Hz - 20kHz |
| Other Audio Features | Channel Balance of 2 dB at 1 kHz, Channel Separation of 20 dB at 1 kHz, Output Level of 5 mV 2dB at 1 kHz at 5 cm/s |
| Power Requirement | |
|---|---|
| Other Power Requirements | 47 kohm Load Resistance, 150 - 400 pF Load Capacitance, 560 mH Internal Inductance, 700 ohm Internal Resistance |
| Additional Features | |
|---|---|
| Other Features | 150 - 400 pF of Cable Capacitance, Main Bearing: 18mm Diameter (Very High Tolerance on Bore Diameter), Rigid Plinth Design |
| Dimension With Cover | |
|---|---|
| Width x Height x Depth | 447 x 115 x 356 mm |
| Dimension Without Cover | |
|---|---|
| Width x Height x Depth | 447 x 115 x 356 mm |
| Weight | 5250 g |
| Warranty | |
|---|---|
| 1 Year NAD Domestic Warranty, for any manufacturing defects/malfunctioning will be either repaired or replaced. Unauthorized tampering of the product during warranty period will cease the warranty. |
Safe and Secure Shopping
All major credit and debit cards are accepted. We also accept payments by Internet Banking, Cash on Delivery and Equated Monthly Installments(EMI).
