This product is based on GSM / GPRS network and GPS satellite positioning system, built-in GSM and GPS antenna, Insert into the car OBDII interface directly to read the data from car computer, you can locate and manage the vehicle remotely via SMS or GPRS. Easy to install, no wiring harness.
TK207 is our newly designed plug-and -play OBD tracker. It could read OBD parameters from car ECU and GPS tracking for car location; All data will be transmit to the backend server for remote diagnostic and tracking purpose.
Applying directions:
12-24V cars,vehicles, Taxi, fleet management
obd gps tracker main function
1.Vehicle OBD II tracker (9V-50V)
2.Location based service(LBS) + GPS double real time tracking solution Monitor
3.Geofence,movement,overspeed alarms.low battery, ext.power off alarm.
4.Alarms under ARM :Shock/ACC alarms.
5.Request for OBD data by GPRS (real time monitor in Mobile or web platform):
Fuel measurement
fuel consumption
mileage
speed
engine status
Diagnostic Trouble Codes,etc
6.Notification of Vehicle fault and maintenance notification
7.Notification of Annual Audit and insurance
Voltage of car battery
8.multi power-saving mode :
Sleep by time / shock sensor
deep sleep
awake at specific time
9.Save GPRS traffic mode
10.Built-in memory for 10000 positions
11.Built-in recharger polymer battery
12.SMS tracking on cell phone with google map link
13.Absolute street address by SMS
14.Web server, Mobile phone APP
Specification:
Content Specification
DIM 50×42×20mm
Weight 60g
Network GSM/GPRS
Band 850/900/1800/1900Mhz
GPS Sensitivity -165dBm
GPS Accuracy 5m
GPS Start Time Cold status 30s
Warm status 11s
Hot status 1s
Backup Battery Chargeable changeable 3.7V Polymer Li-Battery
Storage Temp. -40°C to +85°C
Operation Temp. -20°C to +70°C
Humidity 5%--95% non-condensing
It supports all OBD-II protocols 0.Automatic
1) SAE_ J1850_VPW
2) SAE_J1850_PWM
3) ISO_15765_STD_500
4) ISO_15765_EXT_500
5) ISO_15765_STD_250
6) ISO_15765_EXT_250
7) ISO_9141_08_Init
8) ISO_9141_94_Init
9) ISO_14230_Slow_Init
10) ISO_14230_Fast_Init