AKT RELIFE RL-461 TIP REFRESHER ORIGNAL Adhesive  (20 g)

01.We performed the soldering head repair operation on the ss-004e heating pad.This heating pad works great, high temperature resistance, corrosion resistance, odor-free, easy to clean... 02.The soldering iron head is gently placed in the ointment and waits a few seconds to complete the repair. Repair can be repeated 2 to 3 times if necessary. The surface of the soldering iron is coated with an alloy thermal conductive layer to protect the inner conductive copper core. Polishing and removing the oxide layer directly damages the tip! RELIFE, creating better welding materials Just for the repair master Notice: The soldering iron head can not be repaired without heating. 03.After using the ointment, gently wipe the soldering iron head on a wet sponge,use the RL-461 to repair no damage.(The surface of the soldering iron head is coated with an alloy heat conducting layer, which effectively protects the copper conducting core inside). Resurrection effect? Tip: When soldering iron is not used, please apply tin layer protection on the surface of the soldering iron. The surface of the soldering iron is coated with an alloy thermal conductive layer to protect the inner conductive copper core. Polishing and removing the oxide layer directly damages the tip! RELIFE, creating better welding materials Just for the repair master Precautions? 1. Regeneration operation when the tip temperature is 300 °C~360 °C. 2. Let the soldering tip and the resurrection cream repeatedly rub for a few seconds. 3. Clean the tip with solder sponge or copper wire. 4, plated with a new solder wire layer, the soldering tip can be clean and new. If the effect of the regeneration is not obvious, repeat the steps 3-4 times until the desired effect is achieved, and then apply a new solder wire layer.