All mobile solution Power Supply Tester Checker LED 20/24 Pin(AMS-PST-0214) Digital Battery Tester

Power Supply Tester Checker LED 20/24 Pin for PSU ATX SATA HDD Tester(AMS-PST-0214) Product Description : The Power Supply Tester is a Robust Voltage Tester for PC-Power Supply. Protect Your Computer from Damage. Green LED display lights-up when your devices is running smoothly. Easy to use, plug-in design. The Operation Instruction on The Face of Tester. Prevent electrical disasters by periodically testing power supplies to detect problems before they damage your computer, monitor voltage output. The green LED will illuminate when your device is running smoothly. This new ATX power supply tester can test 4PIN/6PIN/8PIN HDD power connectors and 20PIN/24PIN FLOPPY, very powerful. Rugged plastic, plug-in design, can test PC 20/24 pin, PSU, ATX, SATA, HDD. This power supply tester can test 4PIN/6PIN/8PIN HDD power connectors and 20PIN/24PIN FLOPPY, very powerful. How to Use: power supply to be tested into P4 (P6/P8) plug :- Pull out the P4 (P6/P8) plug from the power tester, and then insert the FLOPPY (floppy drive) plug into the corresponding FLOPPY socket to see if the two lights on the left (+12V, +5V) are on, all lights up is well. Remove the FLOPPY plug from the power tester, and then insert the SATA plug into the corresponding SATA socket to see if the three lights on the left (+12V, +3.3V, +5V) are on, all lights up is well. Features: :- 100% brand new and high quality. The power supply tester is a robust voltage tester for PC-Power Supply, protect your computer from damage. Voltage source:20/24PIN (ATX Connector) Green Indicator light=Power is OK VOLTAGE TEST:+12V,-12V +5V,-5V +3.3V, 5V STAND BY(SB), POWER GOOD(PG) Easy use ,the operation instruction on the face of tester Connectors: Floopy,HDD,CDROM,SATA,4PIN(P4),8PIN,6PIN. Packing Content: 1 x Power supply tester. power supply to be tested into the 24P (20P) :- Plug the 24P (20P) plug of the power supply to be tested into the 24P (20P) socket corresponding to the power tester. Check if the seven lights on the right (+3.3, -12V, PG, +5VSB, +12V, -5V, +5V) are on, all lights up is well. power supply Plug the HDD plug to be tested into the HDD socket :- Plug the HDD plug to be tested into the HDD socket of the power tester to see. if the two lights on the left (+12, +5V) are on, all lights up is well. Remove the HDD plug from the power tester, and then insert the P4 (P6/P8) plug into the corresponding. P4 (P6/P8) socket to see if the left one (+12V) is on, all lights up is well. power supply tester for SATA :- Power Supply Tester 20/24-pin power supply tester for ATX/SATA/HDD power supply. Prevent electrical disasters by periodically testing power supplies to detect problems before. they damage your computer, monitor voltage output. The green LED will illuminate when your device is running smoothly.