AMTIX SG90 Servo Motor | Micro Servo Motor Driver (Pack of 5) Electronic Components Electronic Hobby Kit

The SG90 micro servo is lightweight, high-quality and lightning-fast. The servo is designed to work with almost all the radio control systems. Micro servo motor comes with excellent performance and high torque of 1.5kg cm that gives you the freedom to use it for variety of projects. The SG90 micro servo is perfect for R/C helicopter, plane, car, boat and truck use.The Tower Pro SG90 micro servo motor is the most commonly used servo motor in RC applications. The tower pro micro servo motors are used for control applications which require precision control like robot arm positioning, tool position in machining equipment. The servo motors usually provide control over 180° range. This angular position control is performed by PWM technique so by varying its duty cycle you can control the angular position of the motor. This servo motor SG90 can lift a maximum of 1.6 kg when suspended at 1cm distance from the shaft. It can also be used in robotic arm, CNC machine, Steering systems on RC cars and other robotic or automation applications as well. Technical Specifications: Dimensions: 22 x 11.5 x 27mm Operating Speed (4.8V no load): 0.12sec/60 degrees Stall Torque: 1.2kg / 42.3oz(4.8V); 1.6 kg / 56.4oz (6.0V) Temperature Range: -30 to +60 Degree C Dead Band Width: 7usec Operating Voltage:3.0-7.2 Volts SG90 Micro Servo All Nylon Gear Connector Wire Length: 150mm||It can can rotate approximately 180 degrees (90 in each direction).;The SG 90 servo motor generates a torque of 2.5 kg-cm. This means that the SG motor can pull a weight of 2.5 Kg when it is suspended at a distance of 1 Cm.;The SG90 micro servo motor driver can rotate approximately 180 degrees (90 in each direction) and works just like the standard kinds but smaller.