ASTRAL Trubuild PU Foam Adhesive  (750 ml)

Trubuild PU Foam Trubuild PU Foam is a ready to use PU foam supplied in an aerosol can, which is specially developed for installation of various boards like insulation, paper, floor and roof decking. Application Applications Installing of window and door frames Filling of cavities Sealing of all openings in roof constructions Application of an acoustic baffle Application of a sound absorbing layer It gives adhesion on various substrate which are used as common building materials such as extruded and expanded polystyrene, mineral wool, polyisocyanate and polyurethane foam, plaster, gypsum boards, concrete, brick, stone, wood, metals & bituminous membranes Application Advantages Save time and labour cost Easy application Fast curing so overlaying can be within one hr of application Adhesion on various substrates How to use How to use Ideal working temperature for the foam is less than 35°C. Shake the can for at least 30 seconds fix either the straw provided or a foam gun to the can. The can will operate in any position. Surface should be free from grease and dust. Moisten surfaces with a water sprayer prior to application. Fill holes and cavities for 65 %, as the foam will expand. Repeat shaking regularly during application. If you have to work in layers repeat moistening after each layer. Fresh foam can be removed using acetone. Cured foam can only be removed mechanically. Excess adhesive can be removed whilst wet using any cotton cloth Storage Storage Storage Conditions - Store and transport upright, in cool, dry conditions. Keep away from heat sources. Do not store in hot cars or vans as the can may explode. Maximum storage temperature is 40°C.