Audio Technica AT2035 Large Diaphragm Studio Condenser Microphone
Get notified when this item comes back in stock.
Super Saver Days Starts in15 hrs : 02 mins : 42 secs

Audio Technica AT2035 Large Diaphragm Studio Condenser Microphone

Share

Audio Technica AT2035 Large Diaphragm Studio Condenser Microphone

5
5 Ratings & 0 Reviews
₹11,986
17,099
29% off
Sold Out
This item is currently out of stock
Warranty
Manufacturing Diffect
Highlights
  • Color: Black
Description
AT2035 SPECIFICATIONS† ELEMENT Fixed-charge back plate permanently polarized condenser POLAR PATTERN Cardioid FREQUENCY RESPONSE 20-20,000 Hz LOW FREQUENCY ROLL OFF 80 Hz, 12 dB/octave OPEN CIRCUIT SENSITIVITY –33 dB (22.4 mV) re 1V at 1 Pa* IMPEDANCE 120 ohms MAXIMUM INPUT SOUND LEVEL 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal) NOISE1 12 dB SPL DYNAMIC RANGE (typical) 136 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO1 82 dB, 1 kHz at 1 Pa* PHANTOM POWER REQUIREMENTS 11-52V DC, 3.8 mA typical SWITCHES Flat, roll-off; 10 dB pad (nominal) WEIGHT 403 g (14.2 oz) DIMENSIONS 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter OUTPUT CONNECTOR Integral 3-pin XLRM-type ACCESSORIES FURNISHED AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch. Large diaphragm for smooth, natural sound and low noise • High SPL handling and wide dynamic range provide unmatched versatility • Custom shock mount provides superior isolation • Switchable 80 Hz high-pass filter and 10 dB pad • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source The AT2035 is intended for use in professional applications where remote power is available. It requires 11V to 52V DC phantom power, which may be provided by a mixer or console, or by a separate, in-line source such as the Audio-Technica AT8801 singlechannel or CP8506 four-channel phantom power supplies. Output from the microphone's XLRM-type connector is low impedance (Lo-Z) balanced. The signal appears across Pins 2 and 3; Pin 1 is ground (shield). Output phase is “Pin 2 hot” – positive acoustic pressure produces positive voltage at Pin 2. To avoid phase cancellation and poor sound, all mic cables must be wired consistently: Pin 1-to-Pin 1, etc. An integral 80 Hz hi-pass filter provides easy switching from a flat frequency response to a low-end roll-off. The high-pass position reduces the microphone's sensitivity to popping in close vocal use. It also reduces the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room reverberation and mechanically-coupled vibrations. In use, secure the cable to the mic stand or boom, leaving a slack loop at the mic. This will ensure the most effective shock isolation and reduce the possibility of accidentally pulling the microphone out of its mount. Avoid leaving the microphone in the open sun or in areas where temperatures exceed 110° F (43° C) for extended periods. Extremely high humidity should also be avoided. Audio
Read More
Specifications
In The Box
  • AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
General
Brand
  • Audio Technica
Color
  • Black
Model Name
  • AT2035 Large Diaphragm Studio Condenser
Warranty
Warranty Summary
  • Manufacturing Diffect
Covered in Warranty
  • 5 YEAR
Not Covered in Warranty
  • NA
Warranty Service Type
  • Manufacturing Diffect 5 YEAR
Ratings & Reviews
5
5 Ratings &
0 Reviews
  • 5
  • 4
  • 3
  • 2
  • 1
  • 5
  • 0
  • 0
  • 0
  • 0
Have you used this product? Be the first to review!
Have doubts regarding this product?
Safe and Secure Payments.Easy returns.100% Authentic products.
Back to top