Baseus power bank Power Starter Jump Starter booster 12000 mAh 12 V (1000 A / 600 A) Do you need a reliable jump starter which can make you independent of roadside assistance specialists and let you start your cold car engine on your own? A weak car battery does not need to be an issue if you have your own Baseus jump starter. Parameters of this device are perfect, up to 1000 A of peak current. It is strong enough to let you start your car up to 50 times per charging! An efficient, safe, handy and user-friendly starter is a must-have in every garage! Specification Brand: Baseus Model: CRJS03 Capacity: 12000mAh/3,7V/44,4Wh Rated capacity: 7900mAh Input: 5V-3A[Max] USB output: 5V-2.4A[Max] Type-C output: 5V-3A Initial voltage: 12V Starting current: 600A Peak current: 1000A Weight: 470g Content of the set 1 x jump starter 1 x cable type-C 1 x Smart Starter clamp 1 x operating manual in Chinese and English Major features Very high peak current of 1000 A and starting current of 600 A You can start the car up to 50 times on full charging The built-in display which informs you about battery level in jump starter Highly efficient, polymer secondary cells are resistant to very low and high temperatures Very low power consumption in a standby mode. It can keep up to 85% of energy a year after last full charging, if not used Built-in protection preventing damage of devices connected Thanks to built-in LED lights, it may be used as a traditional flashlight The set includes crocodile clips used to connect to the battery, and USB – USB-C cable The peak current of 1000 A leads to an instant car start-up Adapted to many vehicles with 12-V batteries Remains fully operational at very low and high temperatures Up to 50 start-ups per charging Digital screen with data on battery level Built-in flashlight The set includes crocodile clips, USB -USB-C cable Power Bank for mobile phone charging 9 degrees of security. Security is a priority. For this reason the following built-in functions of Baseus model assure stable and failure-free use of the device: Top-quality lithium-polymer batteries Protection against overcharging Voltage stabilization Protection against electric shock Protection against short-circuit Protection against excessive discharge Protection against reversed connection Protection against overheating Over-current protection Due to size and technical parameters, the device may be taken on the plane. How to correctly start the car with a jump starter? 3 steps: Connect. Insert smart ignition clamps to EC5 interface of the starter – flashing red and green lights inform you about connection status. Clamp. Raise your car hood. Connect wires – positive (red) with battery terminal marked with plus and negative (black) on negative pole in the battery. Start the car. Go back to the vehicle and start it. Before you start driving, remove the starter from the car battery.