DEEPLEEN Rainwater Harvesting Filter 75 MM for Roof Area 1000 sqft Tap Mount Water Filter Tap Mount Water Filter

Make sure that pressure rating of strainer match with system. Use standard fittings while installing the filter in piping network. Ensure correct inlet/outlet direction. Never open the filter when it is under pressure. Filter Dismantling: Turn off the water supply. Mechanical damage of any kind to filter element should be replaced/repaired in time. Do not open filter while filter is under pressure. Material used: PP polypropylene. Cleaning: Before opening the filter, drain all water insiders the strainer by drain valve. Then open the filter, remove the bottom housing cover & then filter element slowly. Wash out all impurities with hand/plastic brush. Assembly: While closing the housing please, Ensure proper fitment of rubber ring with filter element. Ensure strainer element is properly aligned with top & bottom so that no unfiltered water flows through the outlet. Method of disposal after end of life: The filter component can be recycled by plastic scrap processor. Convert to plastic granules.