Doc Fizzix The Wrangler Mousetrap Car Kit:  (Multicolor)

The Wrangler Mousetrap Car Kit: by Doc Fizzix Designed to be a top performing long distance traveler | Perfect kit for first time builders to seasoned veterans alike | Comes ready-to-assemble kit with pre-cut and pre-drilled parts | Light-weight balsa wood frame and low friction brass tubing axles | Doc Fizzix's easy-wind, snag-free propulsion system DESCRIPTION: The Wrangler is an easy to build long distance traveling mousetrap powered racer. The Wrangler is geared with a 15-inch long lever arm that increases the amount of string wound around the drive axle thereby maximizing the pulling distance. The Wrangler comes ready-to-assemble with pre-cut and pre-drilled parts so you can be ready for action and racing on the same day. As with all our kits, The Wrangler comes with step-by-step instructions that are filled with tons of top secret performance tips and tricks that have been developed exclusively by Doc Fizzix so that you will have all the information you need to make The Wrangler a winner. The Wrngler can be assembled in less than 30 minutes for most first time builders and when finished it will travel from 40-55 meters. As with all our top mousetrap racer kits, The Wrangler includes our "easy-to-wind" and "snag-free " string release system that will not tangle or snag for increased performance, a technique developed exclusively by Doc Fizzix. TRAVEL DISTANCE: � 40-55 meters (130 - 180 feet) INCLUDES THE FOLLOWING: � Victor mouse trap � Kevlar high-tech string � Pre-cut and pre-drilled balsa wood frame � Low inertia DVD layer wheels � DVD wheel adapters � Brass tubing axles � Thrust washers � 15" lever arm ��Doc Fizzix's easy-wind, snag-free propulsion system � Step-by-step plans with performance tips and tricks TOOLS REQUIRED: � Needle-nose-pliers � Super glue Size: length = 21 inches, width = 6 inches