DP.LED F102AT Rechargeable AC/DC 18 Inches Table Fan 4-40 Hours Back Up With LED Display NIGHT Light(8-SPEED SWITCH CONTROL) 1400 mm 5 Blade Table Fan  (Ultra High Speed | WHITE | Pack of 1)

Technical parameters Model DP-F102AT Solar Panel Input 15-18V 500mA Charge Input 16V=-- 500mA Voltage AC 100-240V~50/60Hz Rating Power 40W Battery Type 6V 4500mAhx2 Battery replaceable Battery Charge 13Hours USB Output 5V === 1A Working Time Fan: 2-40 hours (High/Low) Night Light: 20-40 hours (High/Low) Power Model AC and DC Available Power Factor 0.6 Light Power 2.1W Precautions . Please read this instruction and charged full before using. Before plugging in the power supply, please confirm that the voltage used is correct. Charge the fan when the lamp turns visibly weak while operating. Avoid completely draining the battery to preserve its lifespan. Charge the fan over 10 hours every 3 months. Turn off the lamp if not using. The charging efficiency will be slow if the temperature is lower than 0°C or higher than 40 °C. Keep away from water and rain. When the fan is working, do not put hard things or finger into the protector net, to avoid damage your body and the fan blades. Do not stop the fan blades by man-made, in order to avoid the current is too heavy to burn the controller and motor. . Do not heavy shake the fan. Children must be supervised by adults before using it. Operations Connect the charger with power supply, red indicator light means charging status, Charging time is around 13 hours. Please press the switch on the back of the fan to the I position before use. Pleas switch to O position after use. When using the fan, press the code switch to turn on the fan function. The default gear position is 4 files, and the battery indicator light is on. The first one indicates that there is 25% power, the second one indicates 50% power, the third light indicates 75% power, and the fourth light indicates 100% power. Turn the encoder switch to adjust the strength of the fan. Press the code switch to turn off the fan function after use. Fan timing function: Press the fan timing switch for the first time. The timing is one hour and the first indicator lights on. Press the fan timing switch for the second time. The timing is 2 hour and the 2th indicator lights on. Press the fan timer switch third time. The third timing is 3 hours and the third indicator lights on. When the fan timing switch is pressed the fourth, timing is 4 hours and the fourth indicator lights on. Press the fan timing switch to the fifth time, the timing function is turned off. Lighting function: Press the first time is weak light, press the second time is strong light, and press the third light to turn off the light. Press the oscillating button for oscillating. Pull up for stop oscillating. With the discharge protect. When battery is lower to protect-current, LED and FAN will stop automatic. Please charge the fan in time. Battery replace: open the battery door to replace the battery. The fan should be recharged frequently. Do not leave it for a long time. If it is not used frequently, please recharge it once every two months, otherwise it will reduce battery life.