Fixate Hard Metal Pin Type Anchor Fasteners 16x150mm x 4pcs Drop-In Anchor  (60 cm)

Pin type Anchor Fastener With bolt and washer ,16x150mm x 4 pcs Round and smooth end for easy insertion, Drill bit diameter should same as Anchor diameter. Flat and hard head prevent any damage in thread during installation, good to use in concrete and masonry / grout filled cmu, any hard bricks wall / plastered wall. Hard Steel used with zinc plating to prevent any rust easily Pin Drive Expansion Bolts-Hammer Strike Pin Type Anchor Bolts are meant for push through method, Pin Type Anchors are impact-expansion type concrete anchors with an interior hole extending the length of the anchor. A hardened drive pin comes along the assembly inserted in the bolt. The anchor is threaded on the upper portion where the drive pin is inserted. Other end of the anchor has four equally spaced slots for a portion of its length, with ribs extending the circumference of the anchor for a portion of its length. Pin Type Anchors are yellow dichromate plated over zinc. Applications: Railings Profiled Steel Machines Gratings Fire Fighting Equipments Lighting Fixtures Conduit Pipes Gates Consoles Steel Constructions Air Conditioning Outdoor Unit Brackets