Generic 5 Channel Light Organ Kit (Multicolor)

5 Channel Light Organ Kit Splits your music into 5 frequency bands, each band controls one light circuit This light organ circuit is so responsive you can 'see' vibrato in your music! Input is from either the built in condenser microphone or line-in from an iPod or computer Supports 110 or 220 VAC - Fully isolated power supply for maximum safety Lamp circuits are fused and can drive up to 2.5A, or 250W per channel at 110 VAC Bring Your Tunes to Life in a Blazing Color Light Show!! 5 Channel Light Organ - New 4th Generation Design! Splits your music into 5 frequency bands, each band controls one light circuit Each band's center frequency and width is adjustable 700W per channel This light organ circuit is so responsive you can 'see' vibrato in your music! Signal input from: Front panel condenser microphone Line level input from an iPod or computer sound card Automatic Gain Control circuit constantly adjusts input sensitivity to match changes in music level Input sensitivity is adjustable; ranging from just above a whisper to the loudest live music Includes a front panel with the Microphone, sensitivity control knob,and main power switch Expansion connector to optionally allow you to locate all the control pots and indicator LEDs to front panel location. You can build light organs with 10 channels, 15 channels, etc. using the XLO-5. The adjustable filter center frequencies makes this possible; using multiple XLO-5's tuned to different center frequencies. Great for parties! Makes a very unique sound-to-light device for the hearing impaired Supports 110 or 220 or 240 VAC Fully isolated power supply for maximum safety Optically isolated TRIAC drivers - fully protects your audio equipment Lamp circuits are fused and can drive up to 7A, or 700W per channel at 110 VAC (3.5A or 700W per channel at 220VAC) 5 Indicator LEDs driven by the TRIACs for testing before you hook up your lights This is an advanced electronic kit containing about 150 components, and will require about 2-4 hours to assemble. The main PCB is 4.9"x4.4"