Genrc Adeept Hexapod 6-Legs Spider Robot Kit for Arduino UNO R3 and Nano | 2.4G Wireless Remote Control | Obstacle Avoidance | Robot S  (Multicolor)

Developed based on Arduino, this 6-Legs spider robot simulates the movements of 6-leg insects via programming in the Arduino IDE and controlling 19 servos. In this robot kit, a complete set of hardware devices are provided as well as example code for your learning. You can also write the code for control by yourself. By programming the robot, you can control each leg and even each joint, and truly feel the thrill and joy of learning and making. YouTube Video Link: https://youtu.be/54Pl00NKJDI Download Tutorials: https://www.adrive.com/public/2KZf9b/Adeept6LegSpiderRobotKitForArduinoV2_0.zip Package List: 1 Set Acrylic Plates 1x Adeept Arduino UNO R3 1x Adeept Arduino Nano 1x Adeept PCA9685-Based 32-Channel PWM Servo Driver 1x Adeept Remote Control Board 1x NRF24L01 2.4G Wireless Transmission Module 1x NRF24L01 2.4G Wireless Transmission Module with PA and Antenna 20x Servo(SG92R) 1x Ultrasonic Module 1x RGB LED Module 1x Passive Buzzer Module 2x 18650x2 Battery Holder 1x 3-Pin Wire 10x Male to Female Wire 10x Female to Female Wire 1x Large Cross Screwdriver 1x Slotted Screwdriver 1x Cross Screwdriver 1x Cross Socket Wrench 1x USB Cable 1x Mini USB Cable 1x Wingding Pipe 1x Ribbon 1x Rubber Sleeve 40x M2 Nut 44x M3 Nut 6x M1.4*6 Self-tapping Screw 6x M3*10 Countersunk Head Screw 50x M2*8 Screw 4x M2*10 Screw 8x M3*5 Screw 34x M3*8 Screw 2x M3*14 Screw 4x M3*30 Screw 6x M3*6 Copper StandoffThe 6-Legs Spider Robot kit is designed based on Arduino UNO R3 and Nano. This is a complete and fun Arduino/Robot learning kit. We carefully prepared a detailed guidebook/tutorial(PDF), the guidebook contains complete circuit diagrams and assembly steps, according to our tutorial, you will be able to easily build your own Spider Robot. | The entire system is divided into two parts, the Spider Robot and the remote control, the communication between them based on NRF24L01 2.4G wireless module. | Adeept Arduino UNO R3 and Nano are included. | Quick-responding technical support for free. | Working Voltage: DC 7V~12V, Power