Fusion Graphix Signs for (Black, Red)

Fusion Graphix

1

CAR 00223

Black, Red

Signs

rectangular

Windows

VINYL

Step 1 Clean the area thoroughly with rubbing alcohol or soap and water. Do not use Windex or similar products because it will leave a residue behind that will prevent the sticker from adhering well. Step 2 Prepare the sticker for application by firmly rubbing a squeegee or credit card across the clear transfer tape. This removes any air bubbles that may have formed and makes the sticker cling to the transfer tape. Step 3 Peel the white paper backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat Step 2. Step 4 Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card. For best results, wait 24 hours before moving to the next step. Step 5 Slowly peel the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface.

1

10 cm

28 cm

0.5 mm