SUPERFAB 3D Carbon Carbon Fiber Car Sticker DIY Paste Protector Strip Door Matte NA 1 Series Side Garnish

Permanent acrylic pressure sensitive adhesive. Stretchable with heat. Conforms to contours and bends easily. High temperature and water resistant. Can be cleaned with soap and water. Stands up against water, dirt, grease, salt, mild acids and oil. Long life with excellent UV durability. Easy Remove without residue. Designed for auto wrapping. Black Please check with local authorities if permission required. Vehicle color change may not be allowed in your area. Multi-use : Stick on any plain clean surface - Design Helmets, Bikes, Cars, Cycles, Cupboards, Fridge etc. Other colors available - White, Maroon, Lemon Green, Blue, Red, Purple, Orange, Black, Golden, Silver. Installation Step 1: Cleaning the surface with rubbing alcohol prior to install will help in adhesion and clean and contaminants that may cause imperfections. Step 2: Using a heat gun can aid in the installation by making the vinyl more pliable and also help in removing wrinkles. Step 3: Using a soft rubber squeegee will help smooth out bubbles and wrinkles. DO NOT install in rainy or cloudy weather. DO NOT wax one week before pasting DO NOT wash 48 hrs after install. If there is a crimp or crease or if the temperature is low, blow with heat gun first from a distance and then paste.