HUBX TP4056X Multilayer PCB

TP4056 2a , TP4056 board, TP 4056 module ,3.7v 18650 lithium battery charging module ~1amp Based on TP4056, this is 3.7V lithium battery charger modules, with a Micro USB interface. It is small size and light weight, especially for a single lithium battery charging. Features: - Input voltage: 4.5V ~ 5.5V- Input Interface: Micro USB port - Charging method: linear charge- A full charge voltage: 4.2V - Charge Current: 1A (default), modify the onboard resistor to adjust the charging current according to the table below. - Charging accuracy: 1.5% - Charging indicator: Red LED charging, Blue LED full. - Output Reverse: lithium batteries can not be reversed. - Overdischarge Current at 4μA (Vcc= 1.8V). - Precision Overcharge Protection Voltage 4.3V ± 50mV - Two Detection Levels for Overcurrent Protection - Dual channel Enhancement Mode power MOSFET : Due to the internal PMOSFET architecture and anti-reverse charging path, no external isolation diodes are required. General >ModelN/A >Quantity10 set >MaterialPCB + Alloy Specification >Input Voltage4.5~5.5V >Output Voltage4.2V >Max. Output Current1A Packaging Details >Unit Type:set >Package Weight:0.005kg (0.011lb) >Package Size:5.5cm x 2.5cm x 2cm (2.17in x 0.98in x 0.79in)