ideal I.I.P - T.P.L Hammer Drill ID HD2-20SE Rotary Hammer Drill  (20 mm Chuck Size, 500 W)

20mm Rotary Hammer | High Quality | 2Mode Part Number: 21737 Double Insulation: An electrical appliance that is double insulated does not have an earth wire fitted. The appliance is designed in such a way that the electrical parts can never come into contact with the outer casing of the device. Variable Speed: Drills usually have a variable speed trigger, meaning that the harder you squeeze, the faster the electric motor spins the driveshaft. Cheaper models run at a single top speed, but pricier models offer between two and four maximum speed settings. Mechanical 2-Speed: Mechanical speed settings are found on more and more (battery-powered) drills. Using its switch, you can set the drill to either screw mode (mode 1) or drill mode (mode 2). Without a mechanical speed setting, one might drill too fast for screwing and too slow for drilling. SDS Plus Shank: SDS Plus has a 10mm shank, while the SDS Max has an 18mm. This means that SDS Max bits have an increased capability for tougher masonry work, withstanding more torque and force. The SDS Plus range is shorter in length and is tailored to lighter duty work and smaller diameter holes. Carrying Case: Comes with a secure carrying case for your convenience, product protection, and storage. Packing Dimensions (cm): 36x28x13 Net Weight of 4Kg gives the product versatility and low user fatigue. A hammer drill, also known as a percussion drill or impact drill, is a power tool used chiefly for drilling in hard materials. It is a type of rotary drill with an impact mechanism that generates a hammering motion. The percussive mechanism provides a rapid succession of short hammer thrusts to pulverize the material to be bored, to provide quicker drilling with less effort. If a hammer drill's impact mechanism can be switched off, the tool can be used as a conventional drill to also perform tasks such as screwdriving.