IRIS Inflatable Outdoor Relaxing Lounge PVC 2 Seater Inflatable Sofa  (Color - Black, DIY(Do-It-Yourself))

Instructions - 1: Take the air sofa out of the bag, unfold it and roll it before starting to inflate. The chamber of the air recliner needs to be filled with air. Open the mouth of the room. - 2: Keep the large opening of the chamber while walking or traveling straight into the wind. Quickly shut off the air in the chamber. - 3: Repeat 1 and 2 until the two chambers are filled with approximately 80%. Then, close both ends of the bag until the air is compressed. The tighter the air is pressed, the more the recliner can hold the air. --4: Bend the corners of the mouth until the clips are put together. Buckle the clip and enjoy the new lounge chair! --5: If at home, in order to avoid being tripped, simply turn on the fan or blower, let the wind into the air recliner, and quickly tighten after inflation. ? Note: 1. Since different computers display colors in different ways, the actual project color may be slightly different from the above image. 2. Due to manual measurement, please allow 1-3mm to be different. 3. You can't step on the top; 4. The inflatable relaxing lounge is an inflatable product. Like a car tire, it requires regular air supply. 5. New products can be filled eight times for the first time. 6. The new air sofa will have a little plastic smell at the beginning. The product has been rigorously tested and has no effect on the human body (children can use it with confidence). They were placed in a ventilated place for two days and the smell naturally dissipated. 7. Choose the inflatable equipment that suits you. Generally, the household electric pump (220V), the single-use time of the electric pump should not be too long. The electric pump should be rested for 10 minutes or so. The time of an inflatable relaxing lounge is about 3~6 minutes. Not waiting. (There is no obvious depression when pressed) Sofa:140*72*71CM/55*28*28inch Material :PVC Package list: 1 x Inflatable Relaxing Lounge.