Laxvila Anti Slip Glow Tape,Luminous Anti Skid Fall Resistant Tape,Glow in The Dark Tape 5 m Anti Slip Tape  (Black Pack of 1)

Features : Fluorescent component, absorb light during the day and glow at night. Abrasive grip traction surface, Non-slip. Strong adhesion, Weather resistant. Indoor or outdoor use, Easy to use and cut. Specifications: ?Material: PVC Base Layer + Strong Acrylic + Paper ?Size: 5m X 5cm ?Weight: 230g ?Color: Black + Green Fluorescent ?Package Included: Luminous Anti-Slip Tape X 1 Roll Anti-Skid Tape Installation Method: -Before installation, the ground to be pasted must be completely cleaned to ensure that it is free of oil, sand and dust, and is completely dry. Avoid the gaps between tiles. -Use scissors to cut the non-slip into rounded corners, so that the paste will be firmer. Prevent it from lifting up due to weak pasting. -Tear off the release paper, paste one side first, slowly tear off the release paper, and press the non-slip tape with a rubber hammer. -After pasting, tap it again with a rubber hammer to ensure it is completely firm. Use a hair dryer to heat the adhesive when the temperature is low, and then tap it with a rubber hammer. Please Note: ?Applicable temperature range: -10?60?. ?The best initial bonding temperature: 20?25?. ?This non-slip tape is waterproof, but not suitable for continuous immersion and cannot be overpainted. ?Suitable for flat, clean, smooth, hard material on the floor or surface. ?Not suitable for rough, soft, moist, dusty floor or porous surface. ?On steps and nosing’s set back at least 15mm from the edge to prevent premature wear.