Liqui Moly Combo Of Diesel Additive , Engine Flush and Radiator Cleaner Full-Synthetic Engine Oil  (600 ml, Pack of 3)

1. ( SUPER DIESEL ADDITIVE ) - Added to diesel fuel for all diesel engines, particularly in modern high pressure engines in passenger and commercial motor vehicles, tractors, construction machinery and stationary engines. 2. ( ENGINE FLUSH ) - One 200 ml can is sufficient for up to 4 liters of oil. Add Engine Flush to the motor oil at running temperature before changing the oil., After adding the product, allow the engine to idle for approx. 10 minutes., Then change the oil and the filter. Engine Flush is compatible with all commercially available motor oils. 3. ( Radiator Cleaner ) - A concentrate specially developed for cooling systems in general but particularly those in motor vehicles. Dissolves contaminants containing lime and oil in radiators, heating systems, pipes and in engines. Modern formula containing complexants with active cleaning agents. Properties does not contain acids or alkalis, disperses sludge, removes oil and grease residues, chemical conversion of lime, neutralizes acids, neutral behaviour in contact with rubber and plastics and compatible with anti-freezes. Areas of application, suitable for all cooling water systems in motor vehicles, buses and commercial vehicles. Add contents to the cooling water. Run the heating system. Depending on the degree of contamination let the engine run approximately 10 to 30 minutes. Drain the cleaner and flush out the cooling system with water. Fill the cooling system according to the manufacturer's instructions. The content (200 ml) is sufficient for 10 litres of water.