meoww TWS ON-1000 Dynamic Design , Perfect music Quality Bluetooth  (Black, True Wireless)

MEOWW Brand Presents Getting Started Charging the Case Insert the small connector of the supplied charging cable into the charging port on the back of the case. Insert the large connector into a USB power source such as the USB port on a computer, or into a 5V USB adapter (not included) and plug into a wall socket. The case charging LED indicator will turn RED while charging, and will turn solid RED when fully charged. Charging the Earbuds Use the included charging case to protect and charge the earbuds as described below. 1. Make sure that the case is fully charged. 2. Open the cover of the charging case and place the earbuds into the correct charging ports. They should easily ""clip"" into place and feel secure. 3. If the earbuds do not automatically begin charging when placed into the case. prea the [Charging Power] Button on the case to begin charging. 4. The earbuds' LED indicators will tuRED while charging and turn BLUE wherty charged. Note: A tone will be heard when the eart5 GLa w on battery. Please recharge when this happens. Bluetooth Pairing 1. Power the earbuds ON. Both of their LED indicators will flash BLUE. 2. After a moment, a voice will be heard on the earbuds indicating that they have paired to each other. 3. Set your mobile device to search for Bluetooth devices. When it appears, select ON-1000 from the list of found devices. 4. Once successfully paired to your device, a tone will be heard and you will be able to play audio on your earbuds. Pairing Issues? See the Re-Pairing the Earbuds section on the next page. Note: Either earbud can be used independently. Answering/Ending Phone Calls When paired, you can control your paired device's phone functions using your device, or the controls on the earbuds listed below. 2x touching on either earbud to answer an incoming phone call. 2x touching on either earbud to end a phone call. Touch and hold on either earbud to reject an incoming call. 4x touching on either earbud to callback. Activating Voice Assistant If your Bluetooth-paired device has a Voice Assistant, you can activate it using the controls on the earbuds. 3x touching on either earbud to activate Voice Assistant. Re-Pairing the Earbuds The ON-1000earbud s should pair to each other automatically when powered ON LUhe earbuds come un-paired from each other, or only one earbud pairs to your device, try following these instrudions to re-pair: 1. Go to your device's Bluetooth settings and find the earbuds on the list of Bluetooth devices. Tap to manually "" Forget "" the earbud(s), then turn your device's Bluetooth OFF. 2. Place the earbuds in their case to power them OFF, then remove them to power them ONagain. 3 After a moment, the earbuds should automatically re-pair to each other. A voice will be heard indicating that they have paired to each other. 4. Once re-paired, you can now pair the earbuds to your mobile device. Turn your device's Bluetooth back on again. Follow the instructions in the Bluetooth Pairing section of this manual to try pairing again.