NAMO Sad Spiderman Vinyl Reusable Laptop Skin Compatible for 15.6 inch  (Theme: NA)

Namo Laptop skins decal add a layer of protection to your computer so you can take it anywhere. Many new laptops have great looking finishes from glossy plastics to brushed metal. Over time wear and tear can take its toll and leave your computer looking scuffed and marred. Laptop skins can prevent superficial scratches and dings and keep your laptop looking new much longer. 1.Clean Your Computer A laptop skin does not adhere well to a dirty computer. Before you apply the new skin wipe dust off your computer with a microfiber cloth. If your computer has visible dirt or grime on the cover use isopropyl alcohol and cotton swabs to wipe it clean. Let the laptop dry completely before affixing the laptop skin. 2.Prepare the Laptop Skin Place the laptop skin on a flat surface with the graphic side facing down. Use a small squeegee or even a credit card to rub over the entire skin pressing hard as you rub. You're helping the decal bond with the clear transfer tape so that you can transfer it to your laptop easily. 3.Position and Tape the Laptop Skin Position the decal on the cover of your laptop computer exactly the way you want it laptop skin is compatible with laptops screen sizes ranging from 14.1 inches to 15.6 inches. Trimning of the skin would be required as per your laptop size with the paper side facing down against the computer top. Use masking tape to hold the decal in three places wrapping the tape around the edge of the computer so you can lift the entire laptop skin away as if it were the cover of a book. 4.Affix the Laptop Skin Peel the computer decal up and away from the backing paper. Work slowly to make sure the entire decal comes up sticking to the transfer tape surface. Once you've lifted it away as if opening a book simply remove the backing paper and throw it away. Then close the book with your masking tape hinges placing the decal exactly where you want it to be. Starting from the center use a small squeegee or a credit card to rub the decal firmly onto the computer top. If you need to use an utility knife to cut a hole that allows your computer's logo to shine through.