Night Sense Automatic Day Night Smart Sensor holder for LED Light Bulb with Flexible Sensor Smart Sensor Light

NIGHT SENSE is a darkness sensor electronic interface designed to work with any light bulb. The device can automatically power ON any connected LED/light bulb in the absence of ambient light (during dark/ night time) and power the bulb OFF in the presence of adequate ambient light. Automate any LED/light bulb by turning it ON & OFF depending on the presence of ambient light. Any existing LED/light bulb can be automated using Night Sense. Night Sense works with general B22-type bulb and holder. Installation: If an LED/light bulb is available with a ceiling/wall mounted bulb holder, remove the bulb form the holder, connect the removed bulb to the bulb holder of Night Sense and then connect Night Sense along with the bulb to a ceiling/wall mounted bulb holder. Bend and adjust the long flexible sensor of the Night Sense such that the sensor faces the ambient/trigger light source (light source based on which the connected LED/light bulb has to be switched ON/OFF). Make sure that the ceiling/wall holder is powered ON and Night Sense will ensure to switch ON the LED/light bulb automatically when sufficient light is not available from the trigger light source and to turn OFF the bulb when adequate light is available from the source. Night Sense is equipped with a slider switch to adjust sensitivity of the device to work in any Indoor/ Outdoor environment. Country of Origin: India