OLatus Arduino Uno R3 Kit with SG90 Servo Motor and HC-05 Wireless Bluetooth module Motor Control Electronic Hobby Kit

OLatus Arduino Uno R3 Kit with SG90 Servo Motor and HC-05 Wireless Bluetooth module Motor Control Electronic Hobby Kit

Price: Not Available
Currently Unavailable
Highlights
  • Power Source: DC, Battery
  • RoHS Compliant
  • Material: Plastic
  • Weight: 370
Description
HC-05 Wireless Bluetooth transceiver module: is used as UART serial converter module. It can easily transfer the UART data through the wireless bluetooth, without complex pieceB layout or deep knowledge in the bluetooth software stack, you can also connect this bluetooth module with your devices listed below, MCU, ARM or DSP systems, GPS or GSM, Sensor Modules, SOC systems. Personal Digital Assistants (PDAs), computer accessories. HC05 Bluetooth Module for Arduino, the Core module is HC-05 bluetooth 2.0 module. By using this Bluetooth module, you can quickly add Bluetooth features to your arduino project. The factory setting is slave mode, but you can set this module to master mode so that you might be able to connect to other Bluetooth 2.0 devices. Specifications: PCB Size: 37.3mm (Long) *15.5mm (wide), Weight: 3.5g, Input voltage: 3.6V--6V, prohibit exceeding 7V, With the connection status indicator, LED flash indicates no Bluetooth connection; Led slow flash indicates enter at command modeEffective transmission distance of 10 meters in open area, Servo SG90: The SG90 mini servo is lightweight, It is standard Quality and lightning-fast servo, designed to work with almost all the radio control systems. It is with excellent performance and high torque of 1.5kg cm gives you the freedom to use it for a variety of projects. The SG90 mini servo with accessories is perfect for R/C helicopter, plane, car, boat and truck use. 170 Points Solderless Mini Breadboard: Mini bread board can be used with various models protoshield (prototype expansion board) of Arduino. Can be crucial for some additional circuitry you might want to add to your existing Arduino project or shield. Invaluable tool for fast build a prototype of an electronic circuit use with transistors, diodes, led, resistors, capacitors and virtually all types of components. accepts a variety of wire sizes (29-20 awg) with self-adhesive tape soldering is not required. can modify or revise the circuits easily suitable for electronic circuit assembly / debugging. Brand new 100% Original 1xPCS Mini Breadboard(170 Point Solderless Self-Adhesive) Best For Project Prototyping. dimension: Approx. 1. 8 x 1. 38 x 0. 35 inch/ 46 x 35 x 9mm Arduino UNO R3 The classic version: Arduino/Genuino Uno is a microcontroller board based on the ATmega328P. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.. You can tinker with your UNO without worring too much about doing something wrong, worst case scenario you can replace the chip for a few dollars and start over again.
Read More
Specifications
In The Box
  • 1 x TowerPro SG90 9g Mini Servo-Standard Quality Motor, 1 x Mounting accessories set, 1 x HC-05 Wireless Bluetooth transceiver module, 1 x Arduino Uno R3 Classic Version Micro Controller, 1 x 170 Tie Point Mini Breadboard, 1 x Piezo Buzzer, 1 x Light detecting resistor(LDR), 1 x 10k Ohm Resistance, 3 x 220 ohm Resistance, 3 x Led, 12 x Jumper Wire
General
brand
  • OLatus
Model Number
  • Arduino Uno R3 Kit with SG90 Servo Motor and HC-05 Wireless Bluetooth module
Type
  • Motor Control
ROHS Complaint
  • Yes
Material
  • Plastic
Dimensions
Width
  • 4 cm
Height
  • 2 cm
Weight
  • 370
Power Features
Battery Type
  • NA
No Of Batteries
  • NA
Battery Size
  • NA
Power Source
  • DC, Battery
Other Power Features
  • Model: SG90, SG90 9g Mini Servo 1.2kgCm – 180 degree Rotation, No-load speed: 0.12 seconds / 60 degrees (4.8V), Stall torque of 1.2 - 1.4 kg / cm (4.8V), Dead-set: 7 microseconds, Operating voltage: 4.8V-6V, All Nylon Gear, HC-05 Wireless Bluetooth transceiver module :, Power Supply: +3.3VDC 50mA, Bluetooth specification v2.0+EDR, Input voltage: 3.3 - 6V With LED indicator light, 170 Tie Point Mini Breadboard:, 170 Tie Point, Mini Self-Adhesive Solderless Breadboard, 17 X 5 X 2 Points Perfect for small project and Completely Reusable, Arduino and Raspberry pi protoshield compatible, Abs Plastic Material, Arduino Uno R3 Classic Version Micro Controller:, Microcontroller ATmega328, Operating Voltage 5V, Digital I/O Pins 14 (of which 6 provide PWM output), Analog Input Pins 6 Flash Memory 32 KB (ATmega328) of which 0.5 KB used by bootloader SRAM 2 KB, EEPROM 1 KB (ATmega328P), Clock Speed 16 MHz
Be the first to ask about this product
Safe and Secure Payments.Easy returns.100% Authentic products.
Back to top