Other Power Features | - Real time clock with the year 2100 to calculate the seconds, minutes, hours, days, weeks, months, years, the ability, as well as the ability to leap year adjustment, Simple 3-wire interface and TTL-compatible, Onboard 32.768KHZ crystal module to provide accurate clock signal, Onboard CR1220 SMD battery holder, An onboard DS1302Z clock chip, Dual power tube for the main power and backup power supply, Wide range of operating voltage 2.0 to 5.5V, Current at 2.0V, less than 300mA, 31, 8 temporary data storage RAM 8 Serial I / O port pin makes the least number of ways, Read / write clock or RAM data trans when there are two single-byte transmit and multi-byte character sets transfer mode, Note : Do not reverse VCC and GND, will it cause damage It requires a pull-up resistor for P0 port of 51 MCU, if without, you can connect the data cable to other terminal
|