play run IPS LCD Mobile Display for LCD J7 2016 J710 SM-J710F J710M J710H J710FN LCD Display With Touch Screen Digitizer Assembly +Tools Galaxy J7 2016 J710 SM-J710F J710M J710H J710FN LCD Display  (With Touch Screen Digitizer, BLACK)

About the product 1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Samsung Galaxy J7 (2016) / J710. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. 7. With your purchase, we will send a smart phone Repairing Tools Set(3 x Screwdriver + 2 x Teardown Rods + 1 x Chuck + 2 x Triangle on Thick Slices) as a Gift. Before Installation Notes 1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.