RHONNIUM IX - JK - 54 - Car 500 AMP Copper Wire Booster Cable for All Cars 6.3 ft Battery Jumper Cable

To reduce the risk of vehicle damage or battery explosion before use. Please read the instruction carefully before use. 1. Connect one RED clamp to the POSITIVE(+) terminal of the dead battery and other RED clamps to the POSITIVE(+) terminal of the donor battery. 2. Connect one BLACK clamp to the NEGATIVE (-) terminal of the dead battery and other BLACK clamps on suitable earth point on the engine block of the donor car. 3. Start the engine of the donor car 4. Turn on the ignition of the car with the dead battery and start the engine 5. Once the engine has started, simply remove the clamp in the reverse order to instruction 2 and 3 above, starting with black clamp first 6. Check both the batteries have the same voltage 7. Ensure clamps are connected to the correct terminals as stated above