Robosoft systems ARM7 LPC2148 Development Board without LCD  (Multicolor)

ARM7 LPC2148 Development Board without LCD Quick Overview This is a initiative at realizing cost effective prototyping and solutions using the versatile LPC 214x series of micro-controllers. Driven at present, by engineering and support , the board is provided with necessary interfaces for a quick realization of embedded solutions. TheLPC2148 Board is a ready-to-run development platform with code snippets to demonstrate applications for every feature supported on the board. The Arm7 Board offers ubiquitous interfaces making it the best board available for the offered price. All the technical information related to the Board is freely available. Comes with User Manual, Schematic and Samples codes in CD. Details ARM7 LPC2148 is ARM7TDMI-S Core Board Microcontroller that uses 16/32-Bit 64 Pin (LQFP) Microcontroller No.LPC2148 from Philips (NXP). All resources inside LPC2148 is quite perfect, so it is the most suitable to learn and study because if user can learn and understand the applications of all resources inside MCU well, it makes user can modify, apply and develop many excellent applications in the future. Because Hardware system of LPC2148 includes the necessary devices within only one MCU such as USB, ADC, DAC, Timer/Counter, PWM, Capture, I2C, SPI, UART, and etc. Specifications of Board: Use 16/32 Bit ARM7TDMI-S MCU No.LPC2148 from Philips (NXP) Has 512KB Flash Memory and 40KB Static RAM internal MCU Use 12.00MHz Crystal, so MCU can process data with the maximum high speed at 60MHz when using it with Phase-Locked Loop (PLL) internal MCU. Has RTC Circuit (Real Time Clock) with 32.768 KHz XTAL and Battery Backup. Support In-System Programming (ISP) and In-Application Programming (IAP) through On-Chip Boot-Loader Software via Port UART-0 (RS232) Has circuit to connect with standard 20 Pin JTAG ARM for Real Time Debugging 7-12V AC/DC Power Supply. Has standard 2.0 USB as Full Speed inside (USB Function has 32 End Point) Has Circuit to connect with Dot-Matrix LCD with circuit to adjust its contrast by using 16 PIN Connector. Has RS232 Communication Circuit by using 2 Channel. Has SD/MMC card connector circuit by using SSP. Has EEPROM interface using I2C. Has PS2 keyboard interface. All port pins are extracted externally for further interfaces.