Robotbanao 30A Simonk Brushless Motor Speed Controller RC BEC ESC for Quadcopter Plane Helicopter Motor Control Electronic Hobby Kit

30AMP 30A SimonK firmware Brush less ESC w/3A 5V BEC Red Features: 30A ESC for multi colour This hardware, with the SimonK firmware, gives you the perfect solution for multirotor use Highest efficiency 100% N-FET design Highest accuracy with Crystal Oscillator (Temperature won't affect the PWM operating range like other cheap ESC's) No low voltage cutoff, because any cutoff in a multirotor = crash No over temp cutoff, because any cutoff in a multirotor = crash Super high refresh rate, no buffering of the input signal, resulting in more than 490Hz response rate 16KHz motor frequency, giving fastest response of the motor, and quietest operation as well (no 8KHz squeal) Super simple, foolproof operation! Nothing to program other than the throttle range Specifications: Max cont. current: 20A Peak current: 30A (10s) Voltage: 2-3S lipo, 5-8 Nicad BEC: 5V/3A Color: Red Item size: 13 * 8 * 4cm / 5 * 3 * 1.6 inch Item weight: 110g / 3.9oz Note (SimonK): Before you buy these, you should make yourself familiar with the somewhat experimental nature of the SimonK firmware. This software pushes the motor response to the limit, so there may be motor and prop combinations that won't work. Due to the lack of overcurrent/overheat/low voltage sensing (needed for multirotors), it's easier to destroy the ESC and possibly the motor too. I can't tell you what will or won't work, other than the motors I sell that I've personally used, so please consult the main SimonK threads on various forums for more info. Neither I, nor SimonK will be responsible for any damage that may occur, so know and accept the risks before using these. That said, I've personally had fantastic results with this firmware and wouldn't use anything else! 1 x 30A SimonK Firmware Brushless ESC