RFM75W is a GFSK wireless rf transceiver module operating in the world wide ISM frequency band at 2400-2483.5 MHz. Burst mode transmission and up to 2Mbps air data rate make them suitable for applications requiring ultra low power consumption. The embedded packet processing engines enable their full operation with a very simple MCU as a radio system. Auto re-transmission and auto acknowledge give reliable link without any MCU interference. RFM75W operates in TDD mode, either as a transmitter or as a receiver. The RF channel frequency determines the center of the channel used by RFM75W. The frequency is set by the RF_CH register in register bank 0 according to the following formula: F0= 2400 + RF_CH (MHz). The resolution of the RF channel frequency is 1MHz. A transmitter and a receiver must be programmed with the same RF channel frequency to be able to communicate with each other. The output power of RFM75W is set by the RF_PWR bits in the RF_SETUP register. Demodulation is done with embedded data slicer and bit recovery logic. The air data rate can be programmed to 250Kbps, 1Mbps or 2Mbps by RF_DR_HIGH and RF_DR_LOW register. A transmitter and a receiver must be programmed with the same setting.
Read More
Specifications
In The Box
1
General
brand
SunRobotics
Model Number
RFM75 LORA 2.4Ghz Wireless RF Transceiver Module
Type
Educational
ROHS Complaint
Yes
Material
Silicone
Additional Features
Other Features
Support 250Kbps, 1Mbps and 2 Mbps airdata rate, Tolerate +/- 60ppm 16 MHz crystal, Variable payload length from 1 to 32bytes, Automatic packet processing, 6 data pipes for 1:6 star networks, 1.9V to 3.6V power supply, 4-pin SPI interface with maximum 8 MHz clock rate, 20-pin 4x4mm QFN package
Dimensions
Width
4 cm
Height
5 cm
Weight
210
Power Features
Battery Type
NA
No Of Batteries
NA
Battery Size
NA
Power Source
DC
Other Power Features
NA
Be the first to ask about this product
Safe and Secure Payments.Easy returns.100% Authentic products.