SYGA Window Broken Aluminum Bridge Right Angle Protective Cover - 4 Pcs  (Multicolor)

ADVANTAGES ? Semi-rigid yet flexible ? Lightweight yet durable ? Easy to install ? Heavy-metal free; non-toxic ? Transparent and clear ? Easy removal leaving no residues INSTALLATION A. Clean furniture surfaces thoroughly and allow them to completely dry. Rubbing alcohol can be used for most surfaces but not all. B. Measure and remove the backing of mounting tape and line it along both the 2 adjacent edges + the top surface of your furniture. Firmly press all 3 faces of the tape for 30 seconds. C. Peel off the remaining tape backing of the 2 round faces first. Position and firmly press Cucina Edge Guard onto the bare tape for 30 seconds. Do not peel off or adhere the flat surface yet. D. Even out any visible air bubbles in the process. Now, gently lift and peel off the tape backing of the flat surface and repeat the process. E. Full adhesion strength is achieved after 48 hours. REMOVAL a. Place a hot cloth (60°C) over the guard, allowing adhesive to soften. b. Gently peel back the edges of the Edge Guard. c. Using your fingers, roll off the remaining adhesive tape and clean your furniture surface. Installation and use: 1. Before use, the corner surface of a table should be cleaned. Use double-sided stick on both sides of the inside of the anti-collision corner, tear the double-sided tape of anti-collision corner, place it in a suitable position, and press it firmly. 3. Take it with light force when not in use, and wipe off the remaining residue with a warm rag.