True Value ACP-13 White Latex Primer  (1 L)

Professional coatings Latex Primer is an quality choice for priming new or unsealed drywall, ceilings, non-staining wood, plaster, stone, brick and concrete. New or unsealed interior drywall, non-staining wood, plaster, brick, stone and concrete surfaces. •100% acrylic •Pigmented •Highly alkali resistant. RECOMMENDED USE: Previously painted or properly prepared and primed interior surfaces. THINNING AND DRY TIME: Thin sparingly with water if necessary for spraying. Dries in 30 minutes. Recoat if necessary after 2 hours. High humidity or low temperature may increase dry time. COVERAGE: 250-400 sq.ft. per gallon depending on the porosity of the surface to be painted. CLEAN UP: CLEAN UP Wash tools with warm water and soap immediately after applying. Properly Dispose of all soiled rags. To recycle or properly dispose of paint in your community. STORAGE: Do not expose this product to excessive heat. Close container after each use. Keep from freezing. APPLICATION METHODS: Average coverage is about 250-400 sq.ft. per gallon depending on the porosity of the surface to be painted. Do not apply over a surface that has not been thoroughly prepared. Mix thoroughly before using and stir occasionally during application. Intermix all containers for color uniformity. Use a premium brush, roller or pad applicator. May be spray applied. Do not over spread. For best performance; apply two coats on new surfaces after priming. Surface Prep: •Inadequate surface prep accounts for about 90% of all paint failures •The surface must be free of dust, dirt, chalk and grime •Damaged wood must be repaired or replaced. •Cracks, gaps and holes can be filled with spackle or drywall compound. ACP-20 FORMULA ANALYSIS -700: RESIN TYPE: Vinyl Acrylic, Sheen/Type Finish: 0-3 @60°/ Flat, Weight per Gallon = 11.41 lbs., Percent Solids by Weight = 46.59 %, Percent Solids by volume = 27.90 %, Viscosity Range = 94-98 KU, V.O.C. = Less than 50 g/L