TRUSTECH OpenMV Cam M7 Smart Vision Camera Electronic Components Electronic Hobby Kit

The OpenMV Cam Features: The STM32F765VI ARM Cortex M7 processor running at 216 MHz with 512KB of RAM and 2 MB of flash. All I/O pins output 3.3V and are 5V tolerant. The processor has the following I/O interfaces: A full-speed USB (12Mbs) interface to your computer. Your OpenMV Cam will appear as a Virtual COM Port and a USB Flash Drive when plugged in. A μSD Card socket capable of 100Mbs reads/writes which allows your OpenMV Cam to record video and easy pull machine vision assets off of the μSD card. An SPI bus can run up to 54Mbs allowing you to easily stream image data of the system to either the LCD Shield, the WiFi Shield, or another microcontroller. An I2C Bus, CAN Bus, and an Asynchronous Serial Bus (TX/RX) for interfacing with other microcontrollers and sensors. A 12-bit ADC and a 12-bit DAC. Three I/O pins for servo control. Interrupts and PWM on all I/O pins (there are 10 I/O pins on the board). And, an RGB LED and two high power 850nm IR LEDs.