Ugears 3D Self Propelled Model Tram With Rails  (Multicolor)

Tram is one of the oldest types of urban public transport. Electric tram appeared at the end of XIX century. To present days survived the first such cable-drawn tram, patented by Abner Doubleday and constructed in San Francisco. Transportation of passengers began September 1, 1873. Later, there were electric trams, such as the famous Budapest tram BKVT 1074, which appeared on the streets in 1912. Let's start a series of urban transport with the ancient tram! Tram UGEARS is the most romantic model! It can carry a message to the other side of the table. Tram starts with a special wheel on the roof. It has a built-in box for notes. This model can work not only on rubber engine but also as a funicular. At the both ends of the path, there are special levers that can pulled the road up and get the carriages down to each other. If you raise the levers and fix the road you'll become a bridge. A lever that pushes the top wheel is used as a «Pantograph» of the tram . On the roof there are also a lever of shift direction, a start lever, a lock position of «pantograph» and cover boxes. At the bottom, on both sides of the tram you can find sliding clutch hooks. There is even a back door opening to the roof. Model for self-assembly without glue. The size of the model with the rails: 30.2*2.9*6.3in (767*73*160mm) Package size: 14.6*6.7*1.2in (37*17*3cm) Number of components: 154