Wallmate Commercial, Residential Window Film  (Multicolor)

INSTALLATION TIPS -1. Clean the window thoroughly. Make sure it is smooth and clean without any dust 2. Measure the window and trim the film to the required size. Leave an extra 1-2cm margin on each side for an easy adjustment. Please trim it carefully with your sharp scissors or knife for it would tear if you use too much force. To ensure the surface is completely clean and smooth, spray the window glass with the soapy water mixture 3. remove the transparent backing film. You may also rub the film’s corner for a while to peel off the backing. 4. Spray enough water on both the Smooth side of the film and the window. 5. Install the smooth side of the window film onto the window. 6. Use the squeegee or the cleaning cloth to remove excess water and any bubbles whilst applying the window film. Wipe the window film back and forth, making sure there's no bubble or water left. 7. Trim off the margins. 8. Use a squeegee or card o flatten out the privacy film.