Wallmate Wrap for Car & Bike (Green)

1.Clean the Surface – Remove all dust, dirt, grease, and wax using a clean cloth and alcohol-based cleaner 2.Measure & Position – Measure the area and place the vinyl wrap in the correct position before applying 3.Peel the Backing Paper – Slowly remove the backing while holding the vinyl carefully 4.Apply the Wrap – Stick the vinyl from one side to the other using a squeegee to avoid air bubbles 5.Use Heat if Needed – Gently heat the vinyl with a heat gun or hair dryer to fit curves and edges 6.Trim Excess Material – Cut off extra vinyl using a sharp utility knife for a clean finish 7.Final Press – Firmly press all edges and corners to ensure strong adhesion.