Watro WR-T Wired Sensor Security System

Best for single phase, 230V Monoblock and Submersible motor Benefits Automatically switch motor on/off on a daily basis. Motor automatically switches off if no water in pipe/sump/ground tank or when water tank is full. Prevent extra electricity and water bills by turning off the motor at right time. Prevent water tank overflow. Prevent seepage of roof and walls. Minimize costly motor repairs. Minimize argument with tenant regarding water tank overflow. Fully covers following cases MCD/Govt water supply through ground pipes. Borewell supply by submersible. Filling water tank from sump/septic tank/stored water in ground tank. How does it works? Controller has three options to set it on/off. 1.Touch buttons 2.Auto/Manual button 3.Digital Timer. Difference between these three options Touch button/Digital Timer => DRY RUN check = YES, Automatic motor switch off = YES, Overflow = NO Manual button => DRY RUN check = NO, Automatic motor switch off = NO, Overflow = YES Set digital timer once and motor will be Switched ON everyday on the set times. It's easy to modify the set time later. Why Watro WR-T? Safe as no open wire is touching the water in tank ABS Plastic Use with installed switch/starter/MCB No additional wiring/sensors required even if used with sump/septic tank/ground tank. Best for House,Shopping Complex,Apartments,Bungalows,Hospitals,Factories,Hotels,Restaurants & Commercial Centers. Notes: If overhead water tank is full but you need more water(for gardening, floor, bike/car wash), use manual button. Keep Digital Timer on auto(default mode)