Xtreme Acoustics ST2, USB audio interface studio 2 with MIDI in and out, 48v phantom power preamp for mic and instrument. Audio Interface

This audio interface also has a 5-pin DIN MIDI in and out connection for connecting your midi device, which enables you to create and record your track simultaneously while you sing. These ports can be used for MIDI sequencing, but the MIDI protocol is useful for more than just instruments and sequencing.

Featuring two dedicated TRS balanced outputs, this audio interface lets you connect speakers with separate stereo and mono ports and phones with 0.63 cm (¼ inch) headphone jacks. There are also dedicated preamplifier knobs for phones and the main output on this audio interface. After you've set the volume for each separately, the phone’s knob can help you easily control the volume of the headphone’s output on the rear of the audio interface. The headphone amplifier is extremely powerful, with a volume that goes as high as 11. The main knob, which has a range of -80 to 10 dB, controls the output level for the main outputs on the back of this audio interface.

This audio interface’s USB provides 48 V phantom power to each channel's microphone inputs. To ensure that all the microphone inputs receive phantom power, all you need to do is press the 48 V button.

This audio interface has a bus-powered USB connection that does not require an external power supply. Furthermore, it is compatible with all types of USB ports, including 1.1, 2.0, and 3.0, enabling you to connect a host of devices.

To use this audio interface, you must first install the driver software, which is available in CD format. If your PC does not have a CD drive, simply visit "https://xtremeacoustics.com/drivers/" and follow the installation instructions to download the driver.