Warranty Summary | - Warranty claims are usually subject to certain terms and conditions, including proper application of the product, meeting specific quantity usage requirements, and following pre-inspection procedures for larger projects.
|
Service Type | - Not Applicable / No Standard Warranty Service Asian Paints Tractor Emulsion does not come with a formal product performance warranty, and hence no official warranty service is typically applicable. However, in rare cases where a limited warranty is extended (such as through certified contractors or special projects), the service type would be: Carry-in service at the nearest authorized dealer or service center Inspection-based claim: Warranty claims (if accepted) are addressed only after site inspection by Asian Paints' technical personnel Replacement or refund of product only, if found defective due to manufacturing issues
|
Covered in Warranty | - Asian Paints Tractor Emulsion is typically a budget category paint and does not come with a formal performance warranty. However, in cases where a limited warranty is provided under a specific project or agreement (e.g., through authorized painters or bulk orders), the following conditions may be covered: Manufacturing defects in the sealed container (such as spoilage or separation before opening) Incorrect shade delivery due to tinting system errors (if mixed at an official Asian Paints Colour World outlet) Product failure under normal recommended conditions of use — but only if: Surface was properly prepared as per Asian Paints guidelines Recommended primer, dilution, and drying time were followed Paint was applied by trained professionals or as per manual instructions Note: Any such claims must be supported with: Proof of purchase Batch number Photographic evidence Site inspection report (if applicable)
|
Not Covered in Warranty | - Peeling, flaking, or fading due to improper surface preparation Damage due to water seepage, dampness, or structural cracks Application on wet or uncured surfaces Failure due to application over distemper or lime wash without proper priming Poor workmanship during application (e.g., incorrect dilution, inadequate drying time) Normal wear and tear, ageing or aesthetic deterioration Damage caused by external factors such as: Abrasion Fire Floods Earthquakes Chemicals or harmful cleaning agents Application over contaminated surfaces (e.g., oil, grease, fungus) Color variation due to mixing errors or batch inconsistency Use of non-recommended primers, putty, or tools
|