BALRAMA 0-99.9% Two Pins High Quality Digital Wood Moisture Meter Portable Humidity Tester Timber Damp Detector with 2 Pins Sensor + Large LCD Display + 4 Calibrated Wood Groups + 9V Battery EMT01 Non-magnetic Engineer's Precision Level  (5 cm)

This instrument is a conductivity moisture meter specially designed for the wood industry. The instrument has four calibration scales, enabling the user to take accurate moisture measurements in different wood species. Using objects: used to measure the water content of wooden, fibrous objects, such as wood ware, bamboo ware, cotton, tobacco, paper, carton, medicinal materials etc. Package 1 x digital moisture meter 1x9v battery 1 x english operation manual operation 1.Remove the CAP to expose the electrode needles. 2.Short press power button: power on the instrument. 3."Mode" button: select the appropriate wood scale a, b, C, D (see the wood calibration tables later in this guide) 4.Push the needle pins into the wood and observe the reading. To hold the measuring data, you can press "hold" button. 5.Long press power button: power off the instrument. Or the instrument will auto power off without operation after 15 minutes. Cover probe shield, then measuring is over. Notes 1.The electrode measurement pins are extremely sharp. Take care when handling this instrument. Don't let children play. Don't point pins at humans or animal to avoid the injury of others when using it. Cover the pins with the protective CAP when the instrument is not in use. 2.When LCD displays low battery icon, replace the battery as soon as possible. When the instrument is not in use for a long time, remove the battery and store the instrument in a stable, dust-free environment out of direct sunlight.