Bright Electronic Components 10mm Sleeve Heat Shrink Cable Sleeve  (10 mm)

Great quality Poly-olefin HeatShrink Tube Polyolefin HeatShrink Tube - Top Quality Heat Shrink sleeve Polyolefin are excellent for insulation. Perfect for electrical, electronic, automotive, hobby, electrical insulation, wire bundling, color coding, mechanical protection, wire/cable joints and repairs etc. Good electrical, mechanical and chemical performance. Ideal for Hobbyists and Model Makers, Electrical, Electronic, Automotive and General Purpose uses. Specification: 1. Diameter: 10mm, Length-2 meters 2. Color: - Black 3. Material: - Polyolefin 4. Shrinkage Ratio: 2:1 (will shrink to 1/2 its supplied diameter) 5. Minimum Shrinkage Temp: +70¡£C 6. Full Shrinkage Temp: +110 deg C 7. Maximum Operating Temperature: -55degC to +125degC 8. Tensile strength: 10.4 Mpa 9. Dielectric strength: 20 kv/mm. How to use a Heat Shrink Tube? 1.Take a Heat Shrink Tube with diameter slightly larger than Cut it according to the required length. 2. Use a heat source to heat up the tube for 10-20 seconds. 3. You will notice the Heat Shrink tube shrinking down and upon completion it will hold the wire firmly. In market, 2 types of HeatShrink Tubes available. Polyolefin HeatShrink Tube 1. Material- Polyolefin 2. Feels like rubber. 3. Does tubes don't get cracked with time 4. Works best for insulation. 5. Is being used in military, aerospace and railway industries, etc. 1. In case Product is faulty, Buyer must notify us within 24 hours of delivery for or replacement. 2. will be accepted only when products are sent in original packaging.