Chrome Star Chemical Works Noble Italia Floor Polish 3 KG Noble Italia Marble Polish 3 KG Paint Polisher  (15 inch)

NOBLE ITALIA HI GLOSS MARBLE POLISHING POWDER No 1 Product for Polishing Italian Marbles. It also works on Indian Marbles except few white and Katni Marbles. Top Features: 1) Number 1 Product in Terms of Quality 2) 50% Extra Shine than any other product. 3) Very Easy to Use 4) 20% Faster Results 5) 100% Safe to Use Directions: • Ready to use powder for polishing and restoration marble floor surfaces. • Use 2 - 3 hp single disc machine with min. 175 RPM with weighing min. 65 KGS. • For polishing marble, use with 3 M red polishing floor pads after 5000 no diamond pads .You can use any good quality brand of diamond pads. • Dosages /Dilution: Make the solution with 4-5 spoon of powder in 100 ml of water on 6 sq ft surface area. Slowly add the water to the powder and shake the mixture to homogeneous thick slurry. Since, buffing will produce heat and evaporate water. Add more water if required while polishing. • Buff the surface for 2 mins/sq ft. then use wet Vacuum or wipe off rest of the slurry. Wash thoroughly with water and clean the surface. It will create a high reflective finish as seen on polished marble tiles and slabs Important Note: 1. USE AS THICK SLURRY BY ADDING SLIGHT AMOUNT OF WATER AND THEN BUFF. ADD VERY LITTLE AMOUNT OF WATER IF REQUIRED WHILE BUFFING. 2. DO NOT DRY THE POWDER. THIS IS WET POLISHING.