ELECSA Residential, Automotive, Commercial Window Film  (Silver)

Installation instructions: 1. Clean the window surface thoroughly to ensure that it is clean enough and free of any dust. 2Measure the size of the window and cut the film. Leave extra 1 inch on each side to allow for adjustment. 3. Peel off the transparent protective film. (Very important!!!) 4. Spray plenty of water on both the glass and the smooth side of the window film. 5. Install the window film onto the window. 6. Carefully scrape out excess water and air bubbles with card or cardboard 7. Trim the excess edges. 8. Wipe the water off the window film with a lint-free towel. Perfectly done!