Flyrobo (2 pc) 1.3 Inch I2C IIC Blue OLED 4 pin LCD Module 4pin (with VC - Electronic Components Electronic Hobby Kit

Length: 3.55 cm Width: 3.35 cm Operating Voltage: 3.3-5V Height : 0.4 cm Resolution: 128 x 64 Pixels Interface Type : IIC Operating Temperature Range: -40 ~ 70 ºC Driver IC: SSH1106 OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays. This is a 1.3 inch blue OLED display module. It is having a resolution of 128×64. The package includes a display board, a display, 6 pin male header pre-soldered to board. The display module can be interfaced with any microcontroller using SPI/IIC protocols. Features: Only Need 2 I/O Port to Control Resolution: 128 x 64 pixels Factory configured for SPI protocol (can be easily changed to IIC) Working temperature: -30°C ~ 70°C Fully Compatible with Programming Board Driving Voltage: 3.3-5V Pin Details: GND (power ground) VCC (positive power supply) SCL (clock line) SDA (data line) Package Includes : 1 x 1.3 Inch 128×64 OLED Display Screen Module with SPI Serial Interface – V2 (BLUE) Test Code for Programming Board Uno: //Include the graphics library. #include "U8glib.h" //Initialize display. U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE | U8G_I2C_OPT_DEV_0); void setup(void) { //Set font. u8g.setFont(u8g_font_unifont); } void loop(void) { u8g.firstPage(); do { draw(); } while (u8g.nextPage()); //Delay before repeating the loop. delay(50); } void draw(void) { //Write text. (x, y, text) u8g.drawStr(20, 40, "Hello World."); } Do not forget to add "U8glib.h" Library. Output: