G&S 10 mm Clear/Transparent 5 Meter, Polyolefin Heat Shrink Cable Sleeve  (10 mm)

Poly-olefin heatshrink tube polyolefin heatshrink tube - heat shrink sleeve polyolefin are excellent for insulation. Perfect for electrical, electronic, automotive, hobby, electrical insulation, wire bundling, color coding, mechanical protection, wire/cable joints and repairs. Good electrical, mechanical and chemical performance. For hobbyists and model makers, electrical, electronic, automotive and general purpose uses. Specification: 1. Diameter: 10mm, length-5 meters 2. Color: - clear 3. Material: - polyolefin 4. Shrinkage ratio: 2:1 (will shrink to 1/2 its supplied diameter) 5. Minimum shrinkage temp: +70 6. Full shrinkage temp: +110 deg c 7. Maximum operating temperature: -55degc to +125degc 8. Tensile strength: 10.4 Mpa 9. Dielectric strength: 20 kv/mm how to use a heat shrink 1.Take a heat shrink with diameter slightly larger than cut it according to the required length. 2. Use a heat source to heat up the tube for 10-20 seconds. 3. You will notice the heat shrink shrinking down and upon completion it will hold the wire firmly. In market, 2 types of heatshrink tubes available. Polyolefin heatshrink tube 1. Material- polyolefin 2. Feels like rubber. 3. Does tubes don't get cracked with time 4. Works best for insulation. 5. Is being used in military, aerospace and railway industries.