G&S Polyolefin Heat Shrink Black Sleeve, Diameter-2mm, Length -5 Meter Heat Shrink Cable Sleeve  (2 mm)

Great quality Polyolefin Heat Shrink Tube Polyolefin Heat Shrink Tube – Top Quality Heat Shrink Sleeve Polyolefin are excellent for insulation. Perfect for electrical, electronic, automotive, hobby, electrical insulation, wire bundling, color coding, mechanical protection, wire/cable joints and repairs etc. Good electrical, mechanical and chemical performance. Ideal for Hobbyists and Model Makers, Electrical, Electronic, Automotive and General-Purpose uses. Specification: 1. Diameter: 2mm, 2. Color: - Black 3. Material: - Polyolefin 4. Shrinkage Ratio: 2:1 (will shrink to 1/2 its supplied diameter) 5. Minimum Shrinkage Temp: +70¡ãC 6. Full Shrinkage Temp: +110 deg C 7. Maximum Operating Temperature: -55degC to +125degC 8. Tensile strength: 10.4 Mpa 9. Dielectric strength: 20 kv/mm How to use a Heat Shrink Tube? 1.Take a Heat Shrink Tube with diameter slightly larger than Cut it according to the required length. 2. Use a heat source to heat up the tube for 10-20 seconds. 3. You will notice the Heat Shrink tube shrinking down and upon completion it will hold the wire firmly. In market, 2 types of HeatShrink Tubes available. Polyolefin HeatShrink Tube 1. Material- Polyolefin 2. Feels like rubber. 3. Does tubes don’t get cracked with time 4. Works best for insulation. 5. Is being used in military, aerospace and railway industries, etc.