Genesis Emblem for Car & Bike  (Silver)

Premium car emblem logo. How To Install: Clean and dry the desired location (flat position) Clean the place where paste the logo thoroughly with rubbing alcohol then wiping with a dry towel to remove any dust, grit, grease, grime wax, or oils. Remove one side of the adhesive, stick well on the back of the metal emblem. Remove the other side of the adhesive, stick it on the desired location of the car. Press well the emblem. Leave it alone without washing the car in 24 hours. Please use detergent to clean the target surface before pasting. How to remove: Use a hairdryer to heat the sticker, then peel off the sticker easily from the car. No Damage: If you wish to remove the sticker then we recommend using a hairdryer to heat the sticker to soften the glue. Remove it from the surface and clean the residual glue with a soft microfibre towel. Perfect decoration and protection for your carPure Chrome Die Cast Metal Badge Strong Auto Adhesive Tape on the backside. Withstands Hot Jet Wash Chemical used to clean alloy wheels. Can be used on Exterior, Wheel Centre, Front Grille, Rear Trunk, Vehicle Body, Engine Cover, Air Box Cover, Interiors, Etc 100% Waterproof. Please apply on flat surfaces.