HANUTECH CCTV Camera Poe Switch 8 Port (10/100) + 2 Port Uplink (10/100/1000) Gigabit Networking Poe Ethernet RJ45 Switch 8 Ports 1000 Mbps Unmanaged Network Switch  (Black)

Hanutech Poe switch with 8 Gigabit PoE+ and 2 Gigabit Uplink slots. Designed for medium to small network environments, its standard 19-inch 1U rack-mount brackets allow for integration with the most widely used mounting systems on the market. The Edimax GS-5208PLG is a superb choice to boost your network environment’s performance and efficiency. IEEE 802.3at/af Power over Ethernet Standard The GS-5208PLG features 8 IEEE 802.3at Power over Ethernet (PoE+) ports which supply up to 30W of electricity per port, and has a total power supply of 160 W to power any 802.3at or 802.3af compliant power device. With PoE detection capability, the GS-5208PLG is able to verify whether the connected device is IEEE 802.3at or 802.3af compliant. In the event that a PoE device is not detected, only network data will be transmitted through the LAN cable. The GS-5208PLG can be used with different PoE products such as access points, network cameras or VoIP devices and is an effective solution for network environments where power outlets are difficult to access. PoE for Easy Installation and Better Cost Efficiency Power over Ethernet technology enables the Ethernet cable to carry both data and power, reducing cable installation and eliminating the need for extension cords or electrical outlets on the walls and ceiling. Overall the GS-5208PLG can lower installation costs and simplify the deployment effort. Power-Budget User Interface for PoE Device Management The GS-5208PLG features an innovative power-budget UI (user interface) which allows IT managers to monitor the power consumption of each PoE port and the total power consumption of connected PoE devices. Monitor the entire PoE network and assess the total power usage before adding new PoE devices to the network architecture. The power-budget UI also features a remote on/off function for each PoE port, so manual plug/unplug isn’t necessary when a PoE device hangs. Simply use the remote power button to quick