KEF Q-650C Large Center speaker Total Dynamic Power Handling Watts - 150 W Home Theatre  (Black, Mono Channel)

"Sit anywhere" uni-q sound At the heart of the evolved q series is the uni-q driver array. The signature innovation places the tweeter in the acoustic centre of the midrange and bass cone, bringing the acoustic ideal of a single point source closer than ever to realisation. The result is a more detailed, accurate three-dimensional sound image, which is dispersed more evenly throughout the room than is possible with any conventional speaker. Uni-q's ultra-wide dispersion is further enhanced through kef's 'tangerine' waveguide over the tweeter dome. New system design New system design The closed box midrange cabinet design reduces the load on the uni-q midrange cone, increasing clarity and detail while delivering cleaner, punchier bass. The uni-q driver is isolated in a closed box cabinet to reduce distortions. With the addition of the damped tweeter loading tube providing a gentle termination of sound produced from the back of the tweeter, lower treble performance is improved dramatically and a new low-distortion inductor on the crossover provides cleaner bass. Beefier lf drivers and abrs Beefier lf drivers and abrs Low-frequency (lf) drivers now have a larger roll surround, along with a new suspension to produce cleaner bass at high volumes. A new cone structure improves midrange clarity, and an enhanced auxiliary bass radiator (abr) with a new surround and rear suspension delivers better controlled and more impressive bass. Model: q650c Design: two and a half-way bass reflex Drive units: 165mm (6.5in.) aluminium uni-q 25mm (1in.)vented aluminium dome hf 165mm (6.5in.) aluminium lf 165mm (6.5in.)aluminium abr Frequency range free field: 55hz (-6db) Frequency response: 64hz-28khz (±3db) Crossover frequencies: 2.5khz Maximum output: 110db Amplifier requirements: 15-150w Sensitivity: 87db (2.83v/1m) Nominal impedance: 8 ohms (min.4.2 ohms) Dimensions: h x w x d: 210 x 629 x 304 mm 214 x 629 x 304 mm (with rubber feet) Weight: 13.6kg(30 lbs) Unit measurement Piece